Introduction
Congratulations on your selection of the TRANSTECH III Transmission Service System. By
choosing this product, you are acquiring the most technologically advanced method available for
automatic transmission service and fluid exchange.
The TRANSTECH III System is a self-contained system; designed to connect to any automatic
transmission through it’s cooling system lines. Once the unit
is connected, it can be used to drain the
fluid from the vehicle’s transmission for filter replacement and/or to completely exchange the
transmission fluid with new fluid, without removing the vehicle’s transmission fluid pan.
With the engine idling, the unit will receive the used fluid expelled by the vehicle’s transmission fluid
pump through one of the hoses connected to the transmission cooling system, and supplies new fluid
through the second hose connected to the other side of the disconnected transmission cooling line.
It is recommended that a vehicle’s transmission lubrication system be serviced every 15,000
miles
(Or according to the vehicle owner’s manual) to obtain the highest lubricant protection, to reduce
friction from internal transmission components, and thus increase the efficiency and life span of the
transmission to it’s maximum.
Please study this Operators Manual to become thoroughly familiar with the TRANSTECH III
Transmission Service System.
IMPORTANT
The TRANSTECH III Transmission Service System is designed to work
EXCLUSIVELY
with Automatic Transmission Fluid.
Use of any chemical during this process may cause operational failure of the
TRANSTECH III System and voids the manufacturer’s warranty.
See warranty card for details.
