8
Rev. 07/2013
2.1
General Safety Instructions
MOTORTECH equipment is manufactured as state of the art and therefore safe and reliable to
operate. Nevertheless the equipment can cause risks or damages can occur, if the following
instructions are not complied with:
–
The gas engine must only be operated by trained and authorized personnel.
–
Operate the equipment only within the parameters specified in the technical data.
–
Use the equipment correctly and for its intended use only.
–
Never apply force.
–
For all work, such as installation, conversion, adaptation, maintenance, and repair, all
equipment must be disconnected from the power supply and secured against unintentional
restarting.
–
Perform only such maintenance and repair work as is described in this operating manual,
and follow the instructions given while working. For maintenance of the equipment, only use
spare parts supplied by MOTORTECH. Further work must only be performed by personnel
authorized by MOTORTECH. Non-compliance with the instructions will void any warranties
for the proper function of the equipment as well as the responsibility for the validity of the
certifications.
–
Safety devices must not be dismounted or disabled.
–
Avoid all activities that can impair the function of the equipment.
–
Operate the equipment only while it is in proper condition.
–
Investigate all changes detected while operating the gas engine or ignition system.
–
Ensure compliance with all laws, directives and regulations applicable to the operation of
your system, including such not expressly stated herein.
–
If the system is not entirely tight and sealed, gas may escape and lead to an explosion
hazard. Upon completion of all assembly works, please always check the system's
tightness.
–
Always ensure adequate ventilation of the engine compartment.
–
Ensure a safe position at the gas engine.
2 SAFETY INSTRUCTIONS
