8 SETTINGS VIA THE MICT
44
Rev. 07/2013
8.7.4
Resetting all PINs
To reset all PINs, proceed as follows:
1.
Open the input dialog via
Device -> Access Control -> Reset all PINs
.
2.
If you are not logged in to the level
Master (level 3)
yet, you will be prompted to log in with
the relevant PIN.
3.
Confirm the input with
OK
.
4.
To reset all PINs, you will be prompted again to enter the PIN for the level
Master (level 3)
.
5.
Confirm the input with
OK
.
▸
All PINs are now reset to the value
0000
.
To reset all PINs, you need the PIN for the level
Master (level 3
). To be able to unlock a system in
case of emergency that was locked in this way, you have the following option:
1.
From the menu bar, select the entry
Device -> Access Control -> Get reset all PINs request key
to open a window with this name.
2.
Send the request key with the serial number to your service contact partner at MOTORTECH
(refer to
Customer Service Information
on page 71). This key is valid only for the respective
controller and only for a certain amount of time.
▸
Your information will be verified, and you will receive an authorization key from your
contact partner.
3.
From the menu bar, select the entry
Device -> Access Control -> Set reset all PINs
authorization key
to open a window with this name.
4.
Enter the authorization key received in the input field.
5.
Confirm the input with
OK
.
▸
If the input was correct, all PINs are reset to the default value
0000
.
