Motortech EasyNOx, Руководство по эксплуатации

Страница: 96 / 142

8 General Operation
96 Rev. 06/2021
Resetting All PINs
The authorization for the access level Master allows you to reset the PINs of all access levels:
1. Log in to the access level Master (see section Logging in and Logging out on page 94).
2. In the area Master Only , tap on Reset All PINs .
▸ All PINs are reset to the value 0000 .
Assign new PINs!
After resetting the PINs, new PINs must be assigned to all access levels to
guarantee maximum security.
Master PIN Forgotten
If you have forgotten the Master PIN, you must apply for a PIN Reset Authorization Key from
MOTORTECH. With this key, you can reset all PINs without authorization for the access level
Master .
Requesting Key
Request the key from MOTORTECH as follows:
1. Tap the Request Key button.
▸ A dialog window with the new and actual PIN Reset Request Key opens.
▸ Send the new PIN Reset Request Key ( New PRRK ) to your MOTORTECH contact person.
2. Tap the Confirm button.
▸ MOTORTECH sends you a PIN Reset Authorization Key based on New PRRK . Note that the
PIN Reset Authorization Key is only valid for a limited period of time.
Entering Key
Enter the key from MOTORTECH in your EasyNO
ₓ
as follows:
1. Insert the USB flash drive containing the MOTORTECH key into your EasyNO
ₓ
.
2. In the area PIN Reset with Key , tap the button Reset All PINs .
▸ The storage locations available are displayed in a window.
3. Navigate to the desired PIN Reset Authorization Key (file extension .prak ) and select it.
4. Tap the Enter button.
▸ All PINs are reset to the value 0000 .