Motorola XR400, Руководство по интеграции

Страница: 120 / 126

C - 2 XR Series RFID Readers Integrator Guide
7 The concept of the different flash file partitions on the
XR Series is different from the AR400. Always The flash file partitions were changed to make
the XR Series compatible with the other Motorola
Windows CE based products
8 Periodic scan information is not displayed on the
Scan Control page. This is different from the AR400. Always Since the time for the next scan is not displayed,
the user does not know when the reader is going
to scan next. Typically this will only affect lab and
test scenarios. In normal production mode the
scan time period is set up and the web page is
not continuously monitored.
9 Conveyer Belt is used on the XR Series instead of
Rapid Read used on the AR400. Always Use the Conveyer Belt instead of Rapid Read.
The Conveyer Belt does not have a mode
feature.
10 The serial port interface to control the reader using
Byte stream protocol is not implemented at the time. Always Use a RS232 to Ethernet adapter.
11 There is no "Setup Wizard". Always This was not a useful feature on the AR400, so it
was not carried over to the XR Series.
12 Separate Read Points in combined group is not
implemented at the time. Always A very small number of applications need this
feature. No work around.
13 Disable HTTP is not honored until reboot. Always Need to reboot to disable HTTP.
14 The XR Series has a different response to the
"PurgeAllTags" command. AR400 sends the number
of tags purged, XR Series only says that the
command is initiated. Also, if events are enabled, the
XR Series does not purge tags for which events are
outstanding (have not been queried by the host). Always If all tags are purged, there may be some tags
that have not been queried by the host which will
also get purged. The XR Series does not purge
tags that have not been queried by the host. This
is a safety mechanism that prevents the loss of
tags that have not been transferred to the host.
15 "Use Antenna Switch" option not present. Always A very small number of applications need this
feature. No work-around.
16 Shelf splitter option is not supported. Always No work around.
17 The LEDs do not light for long periods of time during
an upgrade, the unit may appear to be not working
when actually there is no problem. Always This is not a problem with the XR Series and no
action required.
Table C-4
Feature Differences From The AR400 (Continued)
No. Feature Difference Frequency User Impact / Work Around