Motorola XR400, Руководство по интеграции

Страница: 117 / 126

Firmware Upgrade Procedures B - 5
Update Method 2, Direct Connect Over the Ethernet Port
Use this method if a reader that is not on a LAN needs to be updated.
1.
Use the serial Administrator Console , to disable DHCP on the reader, and configure it for a static IP address
(192.168.1.3)
2.
Configure the host computer to reside on the same subnet as the reader.
a.
Open Network Connections and locate the connection that will be used to connect to the reader.
b.
Open the TCP/IP connection properties, the TCP/IP Connection Properties screen appears. Change to
use a static IP address that is on the same subnet as the reader (192.168.1.5). Click
OK .
Figure B-3
TCP/IP Connection Properties Screen
3.
Connect the Cat5 crossover cable from the host computer to the reader.
4.
On the reader to be updated, access the web based Administrative Console :
a.
Open a browser and type http://192.168.1.3 (or the IP address of the reader to be upgraded, if it is not the
default address above). The
Reader Administrative Console login screen appears (see Figure 3-1 on page
3-2 ).
b.
Enter the user name and password. If this is the first time accessing the console, a prompt appears for a
user name and password update. The default settings are:
Username: admin
Password: change
The Console Main Menu appears (see Figure 3-39 on page 3-44 ).
5.
From the Console Main Menu select Scan Control the Reader Scan Control screen appears (see Figure 3-12
on page 3-11 ).
6.
Select the Enable/Disable Polling button to set to Disable Polling . The button reads Enable Polling if polling is
disabled properly.
7.
Select Maintenance , the Reader Maintenance Console (see Figure 4-1 on page 4-1 ) appears.
8.
Select Version the Version Control screen appears and displays the current version information (see Figure
4-6 on page 4-7 and Figure 4-7 on page 4-8 ).