10
VCD9500/VBC9500
3.
When using the supplied in-line fuse holder
(which must be used if not connecting to
vehicle’s fuse panel):
a.
Ensure the fuse holder contains a 5A UL
Listed slow-blow fuse.
b.
Splice the fuse holder to the end of the red V+
wire, as shown below. Make the distance
from the fuse to the power connection point
as short as possible.
4.
Prepare the cable termination.
a.
Red wire: connect to a +12 or 24 VDC vehicle
power source.
b.
Black wire and Shield wire: connect to vehicle
ground wire or chassis ground.
Shield Wire (bare wire)
Ground Wire (black)
V+ Power (red)
5A Fuse and Fuse Holder
