Quick Reference Guide
7
Mounting the Vehicle Cradle
1.
Select a mounting location for the cradle. It
should be flat, and must provide adequate
support for the cradle.
2.
Prepare the mounting surface to accept four
#10-32 studs, using the mounting template
below. Drill four holes with a #2 or 6 mm drill bit.
3.
Position the cradle on the mounting surface.
CAUTION
Only mount the Vehicle Cradle
in a vertical position with the release level
at the top or in a horizontal position with
the mobile computer display facing up.
Never mount the vehicle cradle on the
side or upside down or on a wall that can
be subject to impact or collision of greater
than 40Gs, in accordance with SAE J1455
Section 4.10.3.5
1.5”
3.81 cm
1.2”
3.05 cm
