manualshive.com logo in svg

Motorola MVME197LE, Руководство пользователя

Motorola MVME197LE - Мощный встроенный компьютер с высокой производительностью. Повна инструкція користувача доступна для завантаження безкоштовно на {веб-сайт}. Детальний посібник користувача допоможе налаштувати й використовувати пристрій ефективно.

Поделиться
Скачать
background image

SAFETY SUMMARY

SAFETY DEPENDS ON YOU

The following general safety precautions must be observed during all phases of operation, service, and repair
of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of the equipment. Motorola Inc. assumes
no liability for the customer’s failure to comply with these requirements. The safety precautions listed below
represent warnings of certain dangers of which we are aware. You, as the user of the product, should follow
these warnings and all other safety precautions necessary for the safe operation of the equipment in your
operating environment.

GROUND THE INSTRUMENT.

To minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical ground. The
equipment is supplied with a three-conductor ac power cable. The power cable must either be plugged into an
approved three-contact electrical outlet or used with a three-contact to two-contact adapter, with the grounding wire
(green) firmly connected to an electrical ground (safety ground) at the power outlet. The power jack and mating plug
of the power cable meet international Electrotechnical Commission (IEC) safety standards.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE.

Do not operate the equipment in the presence of flammable gases or fumes. Operation of any electrical equipment in
such an environment constitutes a definite safety hazard.

KEEP AWAY FROM LIVE CIRCUITS.

Operating personnel must not remove equipment covers. Only Factory Authorized Service Personnel or other qualified
maintenance personnel may remove equipment covers for internal subassembly or component replacement or any
internal adjustment. Do not replace components with power cable connected. Under certain conditions, dangerous
voltages may exist even with the power cable removed. To avoid injuries, always disconnect power and discharge
circuits before touching them.

DO NOT SERVICE OR ADJUST ALONE.

Do not attempt internal service or adjustment unless another person, capable of rendering first aid and resuscitation,
is present.

USE CAUTION WHEN EXPOSING OR HANDLING THE CRT.

Breakage of the Cathode-Ray Tube (CRT) causes a high-velocity scattering of glass fragments (implosion). To prevent
CRT implosion, avoid rough handling or jarring of the equipment. Handling of the CRT should be done only by qualified
maintenance personnel using approved safety mask and gloves.

DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT.

Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized
modification of the equipment. Contact your local Motorola representative for service and repair to ensure that safety
features are maintained.

DANGEROUS PROCEDURE WARNINGS.

Warnings, such as the example below, precede potentially dangerous procedures throughout this manual. Instructions
contained in the warnings must be followed. You should also employ all other safety precautions which you deem
necessary for the operation of the equipment in your operating environment.

!

WARNING

Dangerous voltages, capable of causing death, are present in
this equipment. Use extreme caution when handling,
testing, and adjusting. 

SPD 15163 R-2 (9/93)

Содержание MVME197LE















































































Отзывы:

Нет отзывов

Похожие инструкции для MVME197LE

Balluff BIS Series Manual preview
BIS Series
Бренд: Balluff Страницы: 62
IEI Technology WAFER-8523 User Manual preview
WAFER-8523
Бренд: IEI Technology Страницы: 177
JETWAY P4XFB User Manual preview
P4XFB
Бренд: JETWAY Страницы: 48
Zotac G41 series User Manual preview
G41 series
Бренд: Zotac Страницы: 56
Intel BOXDP43BF Product Manual preview
BOXDP43BF
Бренд: Intel Страницы: 78
Texas Instruments TPA0232 User Manual preview
TPA0232
Бренд: Texas Instruments Страницы: 36
ASROCK Z370M Pro4 Manual preview
Z370M Pro4
Бренд: ASROCK Страницы: 160
Microsemi LX7165 User Manual preview
LX7165
Бренд: Microsemi Страницы: 22
ECS A68F2P-M2 User Manual preview
A68F2P-M2
Бренд: ECS Страницы: 61
Gigabyte GA-M68SM-S2 User Manual preview
GA-M68SM-S2
Бренд: Gigabyte Страницы: 96
TYAN S7086 User Manual preview
S7086
Бренд: TYAN Страницы: 130
u-blox EVK-M8QCAM User Manual preview
EVK-M8QCAM
Бренд: u-blox Страницы: 24
ASROCK IMB-A1000 Settings Manual preview
IMB-A1000
Бренд: ASROCK Страницы: 2
IEPC EPC9179 Quick Start Manual preview
EPC9179
Бренд: IEPC Страницы: 9
IEI Technology ICPMB-7880 User Manual preview
ICPMB-7880
Бренд: IEI Technology Страницы: 43
DFI LanParty PRO875B User Manual preview
LanParty PRO875B
Бренд: DFI Страницы: 141
AGP V28B Manual preview
V28B
Бренд: AGP Страницы: 65
Teridian 73M1903 User Manual preview
73M1903
Бренд: Teridian Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды