Web Page Reference
82
Rx CRC and Align:
Total number of packets with CRC or frame alignment errors.
Rx Undersize:
Total number of packets received that are less than 64 bytes and have a valid
CRC.
Rx Oversize:
Total number of packets received that are greater than the maximum number of
bytes with a valid CRC.
Rx Fragments:
Total number of packets that are less than 64 bytes with an invalid CRC (these
packet types are also known as runts).
Rx Jabbers:
Total number of packets received that are greater than the maximum number of
bytes with an invalid CRC.
Tx Drops:
Total number of frames dropped due excessive collisions, late collision and frame
ageing.
Tx Packets:
Total number of packets received by the interface. This includes both good and bad
packets.
Tx Broadcasts:
Total number of good broadcast packets.
Tx Multicasts:
Total number of good multicast packets.
Tx Collisions:
Total number frames experiencing collisions.
Tx FIFO Drops:
Total number frames dropped due to lack of capacity in the transmit buffer,
for example when the 500 Series bridge is connected to the local Ethernet at a connection speed
of less than 1 Gbps.
Rx & Tx High Priority:
Total number of received or transmitted frames marked as high priority.
Rx & Tx Low Priority:
Total number of received or transmitted frames marked as low priority.
Rx & Tx Pause Frames:
Total number of received or transmitted pause frames.
Statistics Page Refresh Period:
The statistics page refreshes automatically according to the
setting entered here (in seconds).
8.3.4
Install Pages
These pages are used during system installation. There follows a description of the install pages
along with their use during the installation configuration process. The actual installation process
is described in
“Manually Configuring the Wireless Units”.
All wireless links are shipped as paired units. They are pre-configured at the factory so that
they can be installed without the user supplying any configuration. Each wireless link is shipped
with a quick start guide. Attached to the quick start guide is a summary of the pre-configured
configuration data.
shows a sample link configuration. The values highlighted have been
committed to the wireless unit’s non-volatile storage.
Содержание MOTOWI 4
