Motorola Horizonmacro outdoor, Руководство по установке и настройке, Страница: 63 / 212

GSM-204-423 Unpacking and preparing the cabinet
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Inst. 3–7
Unpacking and preparing the cabinet
Tools
Use these tools to unpack, prepare and fit the cabinet:
Knife.
Screwdriver set.
Spirit level.
Socket set.
280 mm adjustable spanner.
Torque wrench.
Lifting straps and 4 x M16 collared eyebolts and suitable hydraulic lifting
gear.
Safety
considerations
For each of the cabinets to be installed, consider the following notes:
WARNING Fully equipped Horizon macro outdoor BTS cabinets can
weigh up to 360 kg. Handle cabinets with extreme caution,
and in accordance with any local health and safety
regulations.
Horizon
macro cabinets are heavy and should not be
installed without the use of lifting equipment unless
sufficient personnel are available to ensure that Health
and Safety regulations are not breached.
Horizon
macro outdoor cabinets are fitted with four lifting
points, designed to accommodate M16 eyebolts, built into
the cabinet sides. Eyebolts used to lift the cabinet must be
of the collared type, must be manufactured to CE
conformity, and must have a safe working load of 400 kg
each.
Eyebolts, must be visually checked for damage before
use. If any damage is apparent, DO NOT USE. The
eyebolts must not be overtightened; hand tight is
sufficient.
Motorola recommend the use of slings in conjunction with
hydraulic lifting apparatus for moving and positioning
Horizon
macro cabinets.
In addition to these points, refer to and comply with any
local regulations that govern the use of lifting equipment.
For the subsequent use of eyebolts, there may be local regulations that govern
the use of lifting equipment and stipulate a test and/or examination regime. If
the eyebolts are to be used, ensure that all such regulations are met.
The installation support procedures are described in the following sections.