manualshive.com logo in svg

Motorola DSP96002, Руководство пользователя

Motorola DSP96002 - Настольный процессор сигналов, предназначенный для обработки цифровых сигналов высокой скорости. Пользователи могут бесплатно загрузить руководство по эксплуатации с нашего сайта. Получите полную информацию о настройках и функциях устройства, загрузив руководство пользователя на manualshive.com.

Поделиться
Скачать
background image

 

3 - 8

DSP96002 USER’S MANUAL

MOTOROLA

 

For the floating-point multiplication the Multiplier accepts two 44-bit input operands, and outputs one 44-bit

result. The operation of the floating-point Multiplier occurs independently and in parallel with the operation

of the floating-point Adder and with the XDB and YDB activity. For the fixed-point multiplication the Multi-

plier accepts two 32-bit input operands, and outputs one 64-bit result. The operation of the fixed point Mul-

tiplier occurs independently and in parallel with the XDB and YDB activity. The Data ALU registers can be

used by the programmer to implement Data ALU pipelines.

The Multiplier is implemented in asynchronous logic and all multiplication operations occur in one instruc-

tion cycle. Latches are provided on the Multiplier input operand buses to avoid race conditions. The major

components of the Multiply Unit are listed below. 

•  Multiplier Array 

•  Multiplier Control Recoder 

•  Exponent Adder 

 

3.3.1.1

Multiplier Array 

 

The multiplier array is a 32 X 32-bit asynchronous, parallel multiplier with 64-bit result. The multiplier array

is based on the modified Booth’s algorithm. The array performs signed/unsigned fixed-point multiplications

with an integer data representation and floating-point multiplications using a 32-bit mantissa. The multiplier

array performs automatic rounding to 32-bit result mantissa for the floating-point multiplications according

to the IEEE Standard 754 for single extended precision. If rounding to IEEE single precision is specified

(explicitly by the instruction or implicitly by the MR register), the result is rounded to 24-bit mantissa accord-

ing to IEEE Standard 754 for single precision. The four IEEE rounding modes are supported; the rounding

mode is specified by the rounding mode bits R1, R0 in the IER register. 

 

3.3.1.2

Multiplier Control Recoder 

 

The multiplier control decoder directs the operation of the Multiplier array and performs multiplier operand

recoding for the modified Booth’s algorithm multiplication. 

 

3.3.1.3

Exponent Adder 

 

The Exponent Adder is an 11-bit adder which serves as an adder for the exponents of the two operands of

the multiplication. It actually computes the sum between the two input exponents and subtracts the bias.

The resultant exponent  is stored in the high portion of the destination register. 

 

3.3.2 Adder Unit 

 

The Adder is the second arithmetic processing unit of the Data ALU and performs all signed/unsigned in-

teger fixed-point add, subtract and shift operations on the data operands as well as floating-point add, sub-

tract and add-subtract. The floating-point add-subtract operation consists of a simultaneous add and sub-

tract performed on the same input operands. This operation is useful for implementing FFT’s (any Radix or

type) and other transforms. 

The operation of the floating-point Adder/Subtracter occurs independently and in parallel with the operation

of the floating-point Multiplier and with the XDB and YDB activity. 

The operation of the fixed-point Adder occurs independently and in parallel with the XDB and YDB activity.

The Data ALU registers provide pipelining for both Data ALU Adder inputs and outputs. 

Содержание DSP96002


































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DSP96002

Salton SFP600 Instructions Manual preview
SFP600
Бренд: Salton Страницы: 10
Barco WGA-510P User Manual preview
WGA-510P
Бренд: Barco Страницы: 11
Jata electro FP500P Instructions For Use Manual preview
FP500P
Бренд: Jata electro Страницы: 20
Suntec Wellness SPI-8380 veggie noodle Instruction Manual preview
SPI-8380 veggie noodle
Бренд: Suntec Wellness Страницы: 38
Crestron MPS-300 Operation Manual preview
MPS-300
Бренд: Crestron Страницы: 96
MAGIMIX Cook Expert Recipe Manual preview
Cook Expert
Бренд: MAGIMIX Страницы: 181
OBH Nordica 6792 Instruction Manual preview
6792
Бренд: OBH Nordica Страницы: 40
Vitek VT-1602 Manual Instruction preview
VT-1602
Бренд: Vitek Страницы: 6
NorthVision VisionShare Manual preview
VisionShare
Бренд: NorthVision Страницы: 11
KRISHNA ELECTRICALS Vallabh CR225-HYX32 Instruction Manual preview
Vallabh CR225-HYX32
Бренд: KRISHNA ELECTRICALS Страницы: 7
Moulinex 887/7345 Manual preview
887/7345
Бренд: Moulinex Страницы: 8
Kasanova GIR000097NOC Instruction Manual preview
GIR000097NOC
Бренд: Kasanova Страницы: 32
Samsung MMR08 Series User Manual preview
MMR08 Series
Бренд: Samsung Страницы: 64
Da-Lite 22516 Installation Instructions Manual preview
22516
Бренд: Da-Lite Страницы: 12
Orban Optimod-AM 9400 Operating Manual preview
Optimod-AM 9400
Бренд: Orban Страницы: 295
SIGNALCORE 7100036-01 Operating & Programming Manual preview
7100036-01
Бренд: SIGNALCORE Страницы: 40
Barco DC2K Installation Manual preview
DC2K
Бренд: Barco Страницы: 15
Barco R9841100 Installation Manual preview
R9841100
Бренд: Barco Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды