Motorola solutions BX-BO-IR Скачать руководство пользователя | Manualshive

Страница: 2 / 41

background image

Document information

This manual was created on Friday, January 8, 2021.

Document ID: IU-CAM-MAN008-3

Legal considerations

Laws that can vary from country to country may prohibit camera surveillance. Please ensure that the relevant laws are
fully understood for the particular country or region in which you will be operating this equipment. IndigoVision
Limited accepts no liability for improper or illegal use of this product.

Copyright

Copyright © IndigoVision Limited. All rights reserved.

This manual is protected by national and international copyright and other laws. Unauthorized storage, reproduction,
transmission and/or distribution of this manual, or any part of it, may result in civil and/or criminal proceedings.

IndigoVision is a trademark of IndigoVision Limited and is registered in certain countries. IndigoUltra, IndigoPro,
IndigoLite, Integra and CyberVigilant are registered trademarks of IndigoVision Limited. Camera Gateway is an
unregistered trademark of IndigoVision Limited. All other product names referred to in this manual are trademarks of
their respective owners.

Save as otherwise agreed with IndigoVision Limited and/or IndigoVision, Inc., this manual is provided without express
representation and/or warranty of any kind. To the fullest extent permitted by applicable laws, IndigoVision Limited
and IndigoVision, Inc. disclaim all implied representations, warranties, conditions and/or obligations of every kind in
respect of this manual. Accordingly, save as otherwise agreed with IndigoVision Limited and/or IndigoVision, Inc., this
manual is provided on an “as is”, “with all faults” and “as available” basis. Please contact IndigoVision Limited (either
by post or by e-mail at [email protected]) with any suggested corrections and/or improvements to
this manual.

Save as otherwise agreed with IndigoVision Limited and/or IndigoVision, Inc., the liability of IndigoVision Limited and
IndigoVision, Inc. for any loss (other than death or personal injury) arising as a result of any negligent act or omission
by IndigoVision Limited and/or IndigoVision, Inc. in connection with this manual and/or as a result of any use of or
reliance on this manual is excluded to the fullest extent permitted by applicable laws.

ii

«
1
2
3
4
...
»

Содержание BX-BO-IR










































Отзывы:

Нет отзывов

Похожие инструкции для BX-BO-IR

Бренд: DW Страницы: 32

Бренд: FBII Страницы: 48

Бренд: HAICAM Страницы: 2

Бренд: Hahnel Страницы: 6

Бренд: YesCam Страницы: 58

LevelPro ProScan 3 Series

Бренд: ICON Страницы: 14

Level pro 200C Series

Бренд: ICON Страницы: 19

vdp20 vandal dome

Бренд: deView electronics Страницы: 2

Бренд: Siqura Страницы: 2

Бренд: TPG Страницы: 6

Бренд: SecurityMan Страницы: 2

Бренд: i3 International Страницы: 42

Бренд: Ziton Страницы: 13

Бренд: Abus Страницы: 2

Бренд: Zhejiang Uniview Technologies Страницы: 28

Бренд: nedis Страницы: 37

Бренд: i-PRO Страницы: 26

SpectrAlert S900RLFIRE

Бренд: System Sensor Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды