1. Select the All Heads tab to adjust the settings that apply to the whole camera. These settings include Flicker
Control and Enable WDR on the Image and Display page, as well as Saturation, Brightness, Sharpness and
Contrast on the Image and Display > Adjustments page.
2. In the All Heads tab, you can set the Imaging mode:
l
Select Global to apply the same settings to all camera heads. Use the settings listed in the All Heads tab
to adjust the camera image settings. The same settings for each numbered Head tab are disabled.
l
Select Per-head to apply different settings to each camera head. Select the different tabs to change the
settings for each camera head.
3. Select each numbered tab to adjust the focus controls for each camera head. These settings must be manually
adjusted for each camera head.
For more information about the different Image and Display settings, see
For more information about enabling and disabling Multisensor IR LEDs, see
Enabling and Disabling IR LEDs
.
Enabling and Disabling IR LEDs
The IR LED Ring page is used to enable and disable the individual IR LEDs on the optional IR LED Ring (MS-AD-IRIL) for
the Multisensor camera. Depending on the placement and use of the Multisensor camera, it may be necessary to
disable some of the IR LEDs on the IR LED Ring. Disabling IR LEDs can avoid issues such as IR light reflecting off of
windows and other reflective surfaces.
1. In the left menu page, navigate to the IR LED Ring page.
2. Select or clear the check box for each individual IR LED, from LED 1 to LED 6 to enable or disable the selected LED.
3. Click Apply to save your changes.
Enabling and Disabling IR LEDs
33
