9
2
4
1
3
5
6
6
1
3
4
5
5
2
1
3
4
2
6
6
EN
03. INSTALLATION
BLADES ASSEMBLY
FIX BLADES
Fit all the blades into the supports
mounted on the side profiles of the
frame.
Put the blade vertically.
SCREW TIGHTENING
Tighten all blade tops on each
side guide with
M6x25
bolts and
washers (two for each screw).
On one side of the side guides there is a metal plate with threaded hole for
fixing the motor arm. As such, these plates should be facing the motor side
(see figure 5)
.
FIX LATERAL GUIDES
Assembly the axes of the side
guide pieces on the plastic tops
of each blade.
Go through the holes of the tops
of the blades.
Fit the rotating axes of the plastic tops
of the blades into the existing frame
supports.
Turn the blade to the horizontal
position.
1
2
3
4
5
6
