10
1
1
3
4
5
2
180°
EN
03. INSTALLATION
MOTOR ASSEMBLY
Do not
tighten the screws
as far as possible to avoid
crushing the rubber.
FIX MOTOR PROFILE
Attach the motor base profile to the
side profiles of the frame with self-
tapping screws.
1
FIT CONNECTION PLATE
Mount the Connection Plate on the Profile
Plate, tightening the screw until it pricks
the aluminum profile.
Holding the screw, tighten the nut to the
Profile Plate to lock the screw.
TIGHTEN MOTOR ARM
Mount the Connection Plate on the
Motor Arm, tightening the screw until the
components touch.
Loosen the screw half a turn (so that the
bushing is loose), and tighten the nut to
lock screw in position.
2
3
4
5
The following steps are only carried out on the application side of the motor.
