5A
5B
6B
max. 5000mm
125mm
200mm
∅11mm
160
mm
250mm
125mm
283,5mm (67,5°)
67,5°
300mm
160mm
125mm
160mm
125mm
200mm
EN
EN
02. AWNING
02. AWNING
ORIENTATION AND CONSTRUCTION
DIMENSIONS
In this type of construction, a single frame is created with the total measurements, but 1 motor and 1
centrol board are added for each module.
When closed, the union joint between modules is not visible from the inside, since the base of the motor
is identical to the blades, giving the idea of a single awning.
In this type of construction, the various modules are located and fixed to one another through the side
profiles of the frame.
2 OR MORE MODULES IN PROJECTION:
2 OR MORE MODULES IN WIDTH:
When the width, projection or area are greater than the maximums defined, you can group several
modules in both width and projection to form a larger awning.
Projection
Width
Module 1
Union of modules
(two legs)
Module 2
Motor 1
Motor 2
Total height
Motor 3
Motor 3
Motor 2
Motor 2
Motor 1
Motor 1
Other dimensions also important:
Width
• Dimension parallel to the blades (width of the blades)
> Maximum width: 4m
Projection
• Dimension perpendicular to the blades (number of blades)
> Maximum Projection: 5m
NOTE:
Width and Projection are measured by the exterior of the frame.
The maximum area for each awning is 16m2, and includes 1 motor and 1 control board for each.
If the awning is applied under some cover, there must be 300mm free for the blades to open
without causing damage to the product.
The BRISA SOLAR is an awning for protection
of exterior areas with integral aluminum
construction. Its rotating and waterproof
blade system allows you to manage the
amount of light on an esplanade as well as
totally protect it from rain.
• Before installing your Brisa Solar, pay
attention to the following dimensions: when
opening the blades, its highest point is
283.5mm, but at 90
°
it will be only 271mm.
