12
1
1
A
A
B
B
+
+
-
-
EN
04. REGULATION
It is important that you turn the tuners only half a turn at a time, since the tuning is very
sensitive. Due to the force of the motor, be careful during the tuning process to ensure that
the mechanical parts do not undergo excessive stress, in order to ensure the longevity of
the product.
The limit switches must be adjusted so that the motor stops as soon as the blades are in a
vertical and horizontal position, without stressing them against the frame.
If rotated clockwise, the awning
will open more, and in the opposite
direction will open less .
If rotated clockwise, the awning
will close more, and in the opposite
direction will close less.
Opening limit switch
Closing limit switch
DETAIL A
The motor limit switches are preset at the factory.
Turn the desired tuner by only half a turn (180°) in the direction
corresponding to the desired setting (see detail A).
Test the motor behavior.
Adjust and test this way until you reach the desired opening and closing
points.
LIMIT SWITCHES
1
2
3
