Motorhispania MH7 Naked, Руководство по ремонту

Страница: 57 / 138

65
5 ELECTRICAL SYSTEM
Clock regulation can be done by pushing Mode button
until when only segments related to TIME function are
active (about 5sec.), while all the others are off (see
picture 5-6).
It’s possible to modify in series: fi rst the hours then the
minutes, this depends by the selected data (that will be
shown blinking with f=1Hz, Duty=50%).
By pushing the Set button the selected parameter
will add one unit, while by pushing the
Mode button it will
be possible to select the chosen parameter (minutes or
hours) and to exit from regulation phase.
Time parameter will be shown in 0-24 format if unit of
measurement chosen is km/h, while it will be shown in
0-12 format if unit of measurement is mph.
In this case on the display You will see on 5 and
6 digits the logo “AM” or “PM” during regulation
phase, see picture 5-7.
Obs. 5-3: Entered the regulation menu, if no bu-
ttons have been pushed, the system will automa-
tically return to standard method of operation (saving
possible modifi cations).
Obs. 5-4: Entered the regulation menu, if the
vehicle starts (speed>0), the system will au-
tomatically return to standard method of operation
(saving possible modifi cations).
Picture 5-7: clock regulation
format 0-12
Picture 5-6: clock regulation