Motorhispania MH7 Naked, Руководство по ремонту

Страница: 66 / 138

74
5 ELECTRICAL SYSTEM
9. MODE AND SET BUTTONS FUNCTION
Aim of the buttons is:
• Allow functions scrolling
• Regulation of the clock
• Set to zero the TD, AVE , LAP and MAX values.
• Entering the Set-up menu to modify the wheel circumfe-
rence value, the measurement unit value of distance,
the number of impulses for every turn of the wheel and
of the engine, and fi nally to associate the graphic bar to
the selected information.
The function scrolling is always possible (it means
the passage from one function to the following
one) with the vehicle stopped or not. To update
the instrumentation with the new function, it’s enough
briefl y pushing the button (tmin = 1 sec.), when it will be
left the display will show the new function.
The setting to zero of TD, of the chronometer, of the
average and max. speed can be done both with the vehi-
cle stopped or in movement as described in the previous
paragraphs.
Clock regulation is possible only when vehicle is stop-
ped.
The entering in the Set-up menu is possible only when
the vehicle is stopped by pushing at the same time the
two buttons for about 4 seconds; the back-up of all data
will be done only when the
Mode and Set buttons (it
depends on selected set up chosen) will allow the
exit from the Set-up menu..
9.1. Sequence of represented functions
The function scrolling is always possible, with the vehicle
stopped or not, by using the
Mode button as follows:
Partial covered distance
Time on turn
Average speed
Max speed TD
LAP
AVE
MAX
Mode Button
TD LAP AVE MAX
Function allowed
Buttons inhibited
Scrolling
Set to zero of selected function
All functions are allowed
Key
OFF
ON
ON
ON
Speed
-
>0
>0
0
Mode
-
ON
OFF
ON
Set
-
OFF
ON
ON