Motorhispania MH7 Naked, Руководство по ремонту

Страница: 95 / 138

104
6 ENGINE
FITTING THE OIL PUMP
• Install the oil pump and a new gasket (1).
Tightening torque: 0.7 m.daN.
• Install the tapered washer (2), the humped side to the
oil pump.
• Install the pinion. (3)
• Install the circlips. (4)
FITTING THE CLUTCH
• Install the conrod and crankshaft assembly:
• The washer (1).
• The pinion. (2).
• The centrifugal fi lter (3), the (F) mark outwards.
• The key. (4)
• The pinion (5) the (C) mark outwards.
• The washer (6) and the nut (7).
• Fit to the primary shaft:
• The tapered washer (8) with the round endtowards
the bearing.
• The plain washer. (9)
• The clutch housing. (10)
• The splined bush. (11)
• The clutch main shaft. (12)
• The tab washer (13) and the nut (14).