manualshive.com logo in svg

MotorGuide TOUR 109, Руководство по эксплуатации, техническому обслуживанию, установке и гарантии

Поделиться
Скачать
MotorGuide TOUR 109 Скачать руководство пользователя страница 38

4. Once the motor is in the deployed position, the deploy latch hooks will

engage to secure the trolling motor.

70022

Adjusting the Trolling Motor Depth

!

 CAUTION

Avoid  possible  serious  injury  from  dropping  the  motor  when  adjusting  the

motor  depth.  Firmly  grasp  the  motor  shaft  with  one  hand  when  raising  or

lowering the motor.

Adjust the depth of the motor to improve trolling motor performance in various

water depths and wave conditions.
IMPORTANT: When adjusting the motor depth, ensure that the propeller

blades are fully submerged 15–30 cm (6–12 in.) below the water surface to

avoid cavitation.

1. Firmly grasp the outer column with one hand.
2. Pull open the cam lock arm until the outer column slides freely.
3. Raise or lower the outer column until the propeller blades are submerged

15–30 cm (6–12 in.) below the water surface.

IMPORTANT: Make sure there is nothing obstructing the operation of the cam

lock lever.

TROLLING MOTOR INSTALLATION AND OPERATION

  

32

eng

Содержание TOUR 109













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды