MotorGuide TOUR 109 Скачать руководство пользователя страница 33

Страница: 33 / 76

The trolling motor is equipped with a MotorGuide HD+ universal sonar plug.

Adapters are available to connect other brands of sonar displays to the trolling

motor. Match the cable connector to the sonar port on the back of the sonar

display. Some sonar multi‑functional displays may require additional cables

provided by the sonar manufacturer. Power up the unit to ensure that the sonar

cable is connected securely.

a -

Harness—to nose cone sonar

Transducer adapter cables available from MotorGuide

Part Number

Lowrance® 9‑Pin HD+ Sonar Adapter Cable

8M4004174

Lowrance® 7‑Pin HD+ Sonar Adapter Cable

8M4004175

Humminbird® 11‑Pin HD+ Sonar Adapter Cable

8M4004176

Humminbird® 7‑Pin HD+ Sonar Adapter Cable

8M4004177

Garmin® 8‑Pin HD+ Sonar Adapter Cable

8M4004178

Raymarine® HD+ Element Sonar Adapter Cable

8M4004179

Raymarine® HD+ Axiom Sonar Adapter Cable

8M4004180

MotorGuide 15' HD+ "Universal Sonar Extension Cable

8M4004245

Reducing Sonar Transducer Interference

Sonar transducers can be affected by interference, such as radio frequency

interference (RFI) and electromagnetic interference (EMI). This interference

can cause undesired operation of the sonar display. Refer to the following list to

reduce sonar interference sources.

1. Lower the sonar sensitivity, also known as gain. Refer to the documents

included with your sonar display.

a. Change the sensitivity to an automatic setting.
b. If the automatic setting does not reduce sonar interference, manually

change the sensitivity to 55–65% of the maximum setting.

2. Verify that the transducer cable is not routed near any power cables.
3. Ensure that the positive (+) and negative (–) power cables are installed

next to each other. This helps cancel any EMI.

4. Inspect the transducer cable for damage, nicks, or cuts. Replace the

transducer cable if it is damaged.

70141

TROLLING MOTOR INSTALLATION AND OPERATION

eng

Содержание TOUR 109













































































Результаты поиска

Содержание TOUR 109

Отзывы:

Бренды по названию

Популярные бренды

MotorGuide TOUR 109, Руководство по эксплуатации, техническому обслуживанию, установке и гарантии

Результаты поиска

Содержание TOUR 109

Отзывы:

Бренды по названию

Популярные бренды