Motomaster ELIMINATOR 11-1586-4, Руководство пользователя

Страница: 8 / 56

SAFETY INFORMATION
(cont’d)
6
SAFET
Y INFORM
ATION
Charger Location
• Locate the charger as far away from the battery as the DC cables permit.
•
NEVER
place the charger directly above the battery being charged; gases from the battery will
corrode and damage the charger.
•
DO NOT
set the battery on top of the charger.
•
NEVER
allow battery acid to drip onto the charger when reading the electrolyte specific gravity
or filling the battery.
•
DO NOT
operate the charger in a closed-in area or restrict ventilation in any way.
DC Connection Precautions
• Connect and disconnect the DC output clips only after setting all of the charger switches to the
“OFF” position (if applicable) and removing the AC plug from the electrical outlet.
NEVER
allow the
clips to touch each other.
• Attach the clips to the battery and chassis, as shown in Connecting Your Battery.
ASSEMBLY INSTRUCTIONS
It is important to fully assemble your charger before use. Remove all cord wraps and uncoil the cables
prior to using the battery charger. Follow these instructions for assembly.
The following tools are needed for assembly: 3/8” wrench, 5/16” wrench, 1/4” wrench, hammer,
screwdriver, Phillips screwdriver.
RISK OF EXPLOSION AND CONTACT WITH BATTERY ACID.
W A R N I N G
ASSEMBL
Y INSTRUC
TIONS
x4
A x4
B
x2
C
x2
D
x2 I
x2
E
F
H
J
G