Motomaster ELIMINATOR 11-1586-4, Руководство пользователя

Страница: 12 / 56

CONNECTING YOUR BATTERY
CONNEC
TING
Y
OUR
BA
TTER
Y
10
Battery in Vehicle (Negative Grounded )
+ + – +
+ –
4
2
3
1
A SPARK NEAR A BATTERY MAY CAUSE A BATTERY EXPLOSION.
W A R N I N G
NOTE:
A marine battery installed in a boat must be removed and charged on shore. To charge it on board
requires equipment specially designed for marine use.
1
Before
connecting and disconnecting the
DC output clamps, remove the AC plug from
the electrical outlet.
NEVER
allow the DC output clamps
to touch each other. This may cause
a spark.
To reduce the risk of a spark near battery:
• Position AC and DC cords to reduce the risk of
damage by hood, door, or moving engine part.
• Stay clear of fan blades, pulleys, and other
parts that can cause injury.
• Check polarity of battery posts. A positive (POS,
P, +) battery post usually has a larger diameter
than a negative (NEG, N, –) battery post.
2
Connect the POSITIVE (RED) clip from the
battery charger to the POSITIVE (POS, P, +)
ungrounded post of the battery.
3
Connect the NEGATIVE (BLACK) clip to vehicle
chassis (must be a heavy gauge metal part of
the frame) or engine block away from battery.
DO NOT
connect clip to carburetor, fuel lines,
or sheet-metal body parts.
4
Connect charger’s AC supply cord to electrical
outlet. (When disconnecting the charger,
turn the Function Switch to OFF, disconnect
the AC cord, remove the clip from the vehicle
chassis and then remove the clip from the
battery terminal.)
• See Calculating Charge Times for length of
charge information.