4
5
Remove all packaging materials lay chassis
on floor as shown.
Unfasten the folding latch on the side of
the chassis.
Lift the handle in the middle of the chassis to
open. There will be a positive ‘click’ when the
lock is engaged.
Push the grey button on the left of the
pushchair and lift the handlebar upwards.
There will be a positive ‘click’ when it
is engaged.
fig 1
opening the chassis
fig
fig
preparation for use
2
1
click!
click!
fitting the front wheels
my4 only.
Attach the front wheels as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release, press button A and remove.
fig 4
fitting the rear wheels
Attach the rear wheels as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release press button B and remove.
fig 6
B
A
preparation for use
click!
fig 5
click!
A
my only.
Attach the front wheel as shown.
Push until they click securely into place.
Pull to make sure they are fully located.
To release, press button A and remove.
my3 & my4 chassis languages D0.14-5 4-5
26/9/08 17:58:57
