Motec MC7180N, Руководство по установке

Страница: 41 / 55

41
7.5.2.6 Configuration SSH / SCP client
Install the SSH / SCP client.
Motec recommends to use WinSCP. The installation
instructions can be found
at
http://www.winscp.net/eng/docs/installation .
1. Start WinSCP on the laptop/PC.
2. Under File protocol : select SCP .
3. Enter the IP address 192.168.50.10 of the video control
unit as the name of the computer (host name) . Enter
22 as the port number.
4. Enter the following parameters for user name and
password:
•
User name : guest
•
Password : Will be sent upon request
5. Click the Save button to save the new session.
6. Assign a name for the connection and mark the check
box Save password .
The new connection is now available as a pre-setting in
WinSCP.