Morgana DIGIFOLD, Руководство по эксплуатации

Страница: 9 / 40

Step 1
Step 4
SET FOLD & CREASE
(’on’ or ‘off’)
Mid-Posn.
Step 3
SET MACHINE TO ‘SET BY FOLD’
(’SEt FoLd’ or ‘SEt Pos’)
SET PAPER LENGTH
Step 8
Step 9
Step 10
Step 6
Step 5
SET FOLD TYPE
Step 7
Quick Start Guide
Turn the Emergency Stop button clockwise
to switch the power on.
Set the Set Up switch to its Mid- position.
Turn the Setting Dial clockwise until the
display reads ‘SEt FoLd’ or ‘SEt Pos’, flick
the Set Up switch upwards to change from
one to the other.
Turn the Setting Dial anti-clockwise until the
display reads ‘CrEES’ or ‘FoLd’, flick the Set
Up switch upwards to select ‘on’ or ‘oF’ for
each as required.
Turn the Setting Dial anti- clockwise to
select the Main display, flick the Set Up
switch down, press the pushbutton and turn
the Setting Dial.
Flick the Set Up switch up to its Mid-
position
Switch the System switch on.
Switch the Compressor switch on.
Switch the Feed switch on to begin feeding
sheets
Step 2
OPERATION
INSTRUCTIONS
Select TypIcal
Main Display
LcF 10 tYPE L
Typical
Display
To Change Fold Type
LEn 100.0
Typical
Display
To Change Paper Length
Turn the Setting Dial clockwise to select
‘LEn’, press the pushbutton and turn the
Setting Dial to set the paper length in 10mm
or 0.1mm increments.
Page 9 SYSTEM
Digifold