Operating the Digifold
In order to feed heavy stock, very small or very large sheets, embossed or even
irregular shaped sheets, it may be required to operate the machine manually.
The machine can be programmed and set up in exactly the same way as explained
when operating the machine automatically. However, when setting up the machine the
paper gate must be raised to its highest position for the sheets to be fed freely.
Operating the machine manually will also require the suction length to be continuous in
order to accommodate various types of stock. Therefore, the suction length switch
must be positioned at ‘III’.
The machine can now be started by activating the System switch to ‘on’.
Flick the Feed switch to ‘on’ and begin to slide the
sheets individually through the paper gate until they are driven by the drive belts.
To stop feeding the sheets, flick the Feed switch to ‘off’ and then the System switch to
‘Off’.
Feeding Sheets Manually
Do not
activate the Compressor switch.
Page 23
SYSTEM
Digifold
Содержание DIGIFOLD
Страница 11: ...Page 11 SYSTEM Operating the Digifold Digifold ...
Страница 40: ...Page 40 CREASING FOLDING ...