Morgana DIGIFOLD, Руководство по эксплуатации

Страница: 12 / 40

SET BY FOLD
1. Turn the Emergency Stop button clockwise to switch the power on, and select the
main display screen.
2. Set the Set Up switch to its Mid-position.
3. Turn the Setting Dial clockwise until display reads ‘SEt FoLd’ or ‘SEt Pos’, flick the
Set Up switch upwards to change from one to the other. (select
4. Turn the Setting Dial anti-clockwise until the display reads ‘CrEES’ or ‘FoLd’, flick the
Set Up switch upwards to select ‘on’ or ‘oF’ for each as required.
5. Turn the Setting Dial anti-clockwise to select the main display, flick the Set Up
switch down, press and hold down the pushbutton PB1 and turn the Setting Dial to
select fold type i.e. h C G etc. Release pushbutton Pb1.
6. Turn the Setting Dial clockwise to select paper length ‘LEn’.
7. Hold down PB1 or PB2, and turn the Setting Dial clockwise to adjust the paper
length in 10.0mm or 0.1mm increments. Release PB1 or PB2.
8. Turn the Setting Dial clockwise to select paper type ‘PAPEr’, i.e. stiffness of paper,
not necessarily the paper thickness.
9. Hold down PB1 and turn the Setting Dial to adjust the paper type. Release PB1.
i.e.
PAPEr 0 is for lightest stock
PAPEr 1 is for light stock of 120 gsm upwards
PAPEr 2 is for heavy stock of 180 gsm upwards
PAPEr 3 is for heaviest stock of 200 gsm upwards
‘SEt FoLd’)
10. Set the Delivery Conveyor System as described on page 20.
11. Adjust the Batch Count as described on page 21, if required.
12. The program settings can now be stored, if required, as described on page 22.
NOTE: These paper types are a guide only, all four settings should be tried
before adjusting the crease or fold positions.
LcF 0
fold type
L = letter
crease on
fold on
count
Operating the Digifold
Typical main display screen Set by Fold
Page 12
CREASING / FOLDING