55
MB 200
rev.0.1UL ID01460
07
Adjust the working height of the cutter: Turn the knob
clockwise to increase the removal of the material. Turn
anti-clockwise to decrease the removal.
Turning the
knob clockwise until it stops the cutter and the fan
are turned off.
08
Place the cover above the press, leaning it to the left fixed
reference and the adjustable one at the bottom of the
press.
09
Load the file in the vise as shown by the arrows in the
picture.
10
Start the process by pressing and holding the safety
dual control until the machine reaches the extreme right
position.
The machine closes the vise and it will begin processing
the book, the cart will start moving passing on the cutter
and the glue unit, when it comes to position the press will
apply the cover (if selected).
If the buttons are released during the forward stroke,
the cart locks immediately. With a pressure of the left
dual control the vise opens up. With a further and
continuous pressure the cart goes back to the loading
position.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
