Operator Manual
DigiBook 150
46
Rev. 1.00-C
4.
Icon, glue station button. When the icon is pressed, the window below will appear.
The number in the yellow box is the desired value of temperature, that one in the green box
is the current value of the temperature. The indicators with “ * ” will be
red
if the tempera-
ture is out of threshold of tolerance,
green
if they are in. Current fixed threshold (-2°C
+5°C).
The button on the center of the windows (red one) put the machine in stand-by without wait-
ing for the stand by timer set up on 1800 Sec.
Pressing on the hand, you access to windows for manual movements for the nozzle (see be-
low).
The temperatures must be set up according to the kind of glue you are going to use, please refer to
the temperatures suggested by the glue producer.
The premelter temperature must be 5° to 15°C lower compared to that one of the extruder. During
the heating phase the indicators will be red and the machine will highlight the message
“Temperature not OK “.
When the detected temperatures will correspond to the set ones, the indicators will be green; at this
time the machine will wait for a timer expectant for temperature stabilization. At the end of this
process the ma chine will be ready for use.
