Operator Manual
DigiBook 150
28
Rev. 1.00-C
10.1
FUNDAMENTALS
Pay Attention during the glue
loading because of the high tem-
perature, as indicated by the la-
bel, and use protective systems
such as gloves.
When you operate with PUR
glue or with glue that is harmful
to health, you have to adopt all
the safety systems to handle
these kind of substances, espe-
cially when you open the glue
tank or when you replace the
glue or you do the cleaning pro-
cedure for the nozzle and the
premelter.
The tank has to be added with
the same type and brand of glue.
You can use a different kind of
glue only when the system is
completely empty and cleaned by
using the Blue-Cleaner.
Drain as much as possible the glue that
you want to replace.
Enter in the tank a quantity of about
600g of Blue-Cleaner and make it pro-
trude from the main slot and the channel
of the glue; if at the end of this cleaning
cycle you are not sure that from the
valve 100% Blue-Cleaner exits, repeat
the operation.
Never open the tank when it is
cold.
Possibility to break the seal gasket. In
addition to that the air humidity will en-
ter into the tank and will be trapped
causing premature ageing of the glue
(curing) with likely obstructions and
need of maintenance.
The machine cannot stay with
the glue tank opened more than
10 minutes if there is PUR glue
inside.
The glue in contact with moist air modi-
fies her composition, creating damages to
the machine.
The machine can’t stay with the
glue system empty for more than
10 minutes
The PUR glue dries permanently; in this
case you risk permanent damage to the
glue system. If you don’t have a glue car-
tridge available, put in the tank at least
500 grams of Blue and wait to be melted
before to switch off the machine.
