Operator Manual
DigiBook 150
23
Rev. 1.00-C
8
INSTALLATION
8.1
TECHNICAL STAFF FOR THE INSTALLATION
The machine must be installed by people specifically trained and authorized by K.G.S. .
8.2
PHYSICAL CHARACTERISTICS OF THE AREA
OF
PLACEMENT
In addition to the overall dimensions of the machine given in the previous chapter, you must also
meet the following conditions:
Near the area of placement of the machine should be arranged the sources of electric power and
pneumatic following what is written in this manual.
Provide sufficient space for normal use, maintenance of machinery, for any command and for addi-
tional equipments to connect. Refer to the draft in the chapter of the positioning.
The chosen site should not be close to deposits of flammable materials, or to operational sites that
may create flammable or explosive atmospheres.
For the installation you must choose an operational area depending on the size of the machine parts
and lifting equipment selected and pay attention to the presence of any obstacles on the road
(equipments, walls, etc.).
8.3
BOLSTER
The machine requires no special foundations. It must be ensured the availability of an industrial
floor.
The producer has no responsibility about construction of foundations (resistance calculation, thick
reinforced concrete, etc.), which are under responsibility of the customer or company performing
the design and construction of the foundations themselves.
The Master Book rests on four feet of 100 mm diameter.
8.4
WEATHER PROTECTION
The machine must be placed indoor, protected from direct contact with atmospheric agents.
8.5
LIGHT
To use and maintain in a safety way the machine a good light is needed. The room lighting should
have a value that should allow normal operations without causing risks to the shadows.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
