TIY
The Interface Solution Experts 7
Programmable Isolated
Thermocouple Transmitter
TIY Model Numbers
To order additional or replacement modules for your
system, refer to the Ordering Information table and
“build” a model number using the information in bold
text. Specify the following in order:
Product / Input Code
1
-Calibration Value
2
F
(Fahrenheit) C (Celsius) or MV (Millivolts) / Output
/ Power / Option(s) [Housing]
1
Tables 1 and 2 list the range code for the model
number Input Code you need for your application.
2
Indicates the actual range that you want your TIY
calibrated to (must be within the range shown in
Tables 1 and 2).
For a TIY, specify:
TIY / J1-0-200 C / 4-20MA / 12-42DC / -ND [HP]
Calibration
Prior to shipment, every TIY is subjected to rigorous
testing by our team of skilled technicians. Every
product Moore Industries manufactures, sells and
services is guaranteed to meet the strict quality
standards that have become synonymous with our
name.
Before placing your TIY into service, a bench check
of basic operation is recommended to ensure that
the unit has not sustained any damage during transit,
and to set zero and span for your application.
Every unit should be:
• Checked to verify that the appropriate TIY model
has been ordered for the intended application.
• Connected in a calibration setup (described later
in this section) and checked for desired output.
• Adjusted for desired zero and span.
Table 2.
Range Limits and Accuracy for the TIY with Millivolt Input
Input
Type
mV
No
Code
Range
Code
MV1
MV2
MV3
PRG
Lower
1
(= to 4mA)
-10mV
-6mV
-10mV
Upper
2
(= to 20mA)
75mV
24mV
7mV
Input
10 microvolts
3.4 microvolts
2 microvolts
Output
3
±0.05% of span
±0.05% of span
±0.05% of span
Reference
Junction
Compensation
N/A
N/A
N/A
*SP1 option required for J3 and T3 Range Codes (replace N1 and N2 Range Codes)
**SP2 option required for B1 Range Code (replaces S1 Range Code)
Notes:
1. The TIY output will limit at values which are 5% of maximum span lower than this value and will then display "–LO–".
2. The TIY output will not display values which are 10% of maximum span greater than this value. When exceeded, the display
reads "–HI–".
3. Output accuracy is in relation to the unit's calibrated span. See Table 1 and Table 2 for additional span accuracy information.
Maximum
Zero
55mV
17mV
3mV
