Moog IMI220-145D001, Руководство пользователя

Страница: 30 / 113

PARISON CONTROLLER
moog
30 MAN145-UM-D01A-EN Moog Italiana srl - Bergamo
3.2 Digital Input (Card IMI220-6100A001).
Pin n° Name Description
1 nc
2 Start profile group 1 Profile start signal for group 1 regulators
3 Photocell parison group 1 Measure signal of parison length for group 1 regulators
4 Mould ready group 1 Signal for mould ready to collect group 1 parison
5 Purge group 1 External enable for group 1 purge
6 Start profile group 2 Profile start signal for group 2 regulators
7 Photocell parison group 2 Measure signal of parison length for group 2 regulators
8 Mould ready group 2 Signal for mould ready to collect group 2 parison
9 Purge group 2 External enable of group 2 purge
10
GND
11 nc
12 Stand by die gap Die gap closing signal during accumulation phases
13 Temperature OK Operation enable of regulators and extruders
14 Emergency Operation enable
15 Presence alarm in machine Indication of machine alarm pieces
16 Machine in automatic Indication of machine in automatic or manual mode
17 Piece discard Decrease of produced pieces caused by a rejection
18 Not used.
19 Not used.
20 GND
3.3 Digital Output (Card IMI220-6150A001).
Pin n° Name Description
1 +24V Supply v24V.
2 End filling Indication of reached accumulator end of filling quota
3 End extrusion Indication of reached end of extrusion quota
4 Synchronism 1 Sync command n°1 of first thickness regulator
5 Synchronism 2 Sync command n°2 of first thickness regulator
6 Synchronism 3 Sync command n°3 of first thickness regulator
7 Synchronism 4 Sync command n°4 of first thickness regulator
8 Synchronism 5 Sync command n°5 of first thickness regulator
9 Serial marker Command of serial marker actuator
10
GND
Supply voltage 0V.
11 +24V Supply v24V.
12 Increment extruder 1 Increase command for extruder 1
13 Decrement extruder 1 Decrease command for extruder 1
14 Increment extruder 2 Increase command for extruder 2
15 Decrement extruder 2 Decrease command for extruder 2
16 Enable timer switch Enable command from timer switch
17 End production End of product signal
18 Alarm Alarm signal
19 Head in calibration Head number 1 in calibration mode
20
GND
Supply voltage 0V.