RP424PFC Indoor Gas Fireplace
Page 42
XG0781 - 151104
Installation
Section 10: Installing the Glass
The
RP424PFC
includes three layers of tempered glass. The
outermost layer serves as a protective barrier which meets the 2015
safety standards and helps prevent against burns.
Unpacking the Glass Crate:
The following steps should be taken when unpacking the glass crate.
Step 1:
Starting with the bottom of the glass crate, stand the crate
on end and remove both screws from one end of the center brace
as shown in
Figure 78
.
Figure 78.
Step 2:
Remove the lower screw only from the top brace as shown
in
Figure 79
.
Figure 79.
Step 3:
Remove the upper screw only from the bottom brace as
shown in
Figure 80.
Figure 80.
Step 4:
With the help of an assistant, carefully place the glass crate
flat on its bottom side.
Note:
the glass crate is heavy.
Figure 81.
Step 5:
Remove the upper bracing.
Figure 82.
Do not operate appliance with any of the three layers of glass
removed, cracked, or broken. Replacement of glass should
be done by a licensed or qualified service person.
WARNING