XT0016
9
Installation
5. Feed On/Off switch
through drawer frame
6. Feed Fan, LED, PPO, and
pilot wires through drawer
frame.
7. Disconnect On/Off switch and feed cable through drawer
frame. Install in space on left inner wall.
9. Place on LED wire on rightside firebox floor with adhesive wire
pad. For LED Install instructions see
Optional LED kit Install/
Replace
instructions
10. Loop Pilot wires from behind control board drawer to the
front. Plug into X2 and X3
8. Place Fan wire on leftside firebox floor with adhesive wire pad.
For fan Install instructions see
Optional fan kit Install/Replace
instructions
11. Valve wires are plugged into the valve in the Green, Red, and
yellow ports respectively.
Figure 24.e
On/Off switch through drawer
Figure 24.i
LED wire
Figure 24.j
Pilot wires
Figure 24.k
Valve wires
Figure 24.g
On/Off switch
Figure 24.h
Fan wire
Figure 24.f
Fan, LED, PPO, and pilot wires
through drawer
