MONTGOMERY BOATS 340 SPORT YACHT, Руководство пользователя, Страница: 44 / 191


MONTEREY
BOATS
Electrical System
Amp
Provides protection and power for the stereo am-
plifier. This “push to reset” breaker is supplied
current when the House battery selector switch
is activated.
Cabin Pump
Provides protection and power for the automatic
float switch on the forward bilge pump in the cabin
bilge. This “push to reset” breaker is always sup-
plied current when the batteries are connected.
Another breaker in the helm breaker panel pro-
vides circuit protection for the manual switch.
Emergency Pump
Provides protection and power for the automatic
float switch on the emergency bilge pump in the
engine compartment bilge, below the step. This
“push to reset” breaker is always supplied cur-
rent when the batteries are connected. Another
breaker in the helm breaker panel provides circuit
protection for the manual switch.
Bilge Pump
Provides protection and power for the automatic
float switch on the aft bilge pump. This “push to
reset” breaker is always supplied current when
the batteries are connected. Another breaker in
the helm breaker panel provides circuit protection
for the manual switch. This breaker also provides
protection and power for the high water alarm.
Sump Pump
Provides protection and power for the automatic
float switch in the shower sump pump. This “push
to reset” breaker is always supplied current when
the House battery switch is activated.
Carbon Monoxide Detector
Supplies 12-volt electrical current to the carbon
monoxide detectors in the cabin. This is a “push to
reset” breaker that is normally on, unless tripped
by an overload, when the House battery switch is
activated. It should be checked, and the power
indicator on the carbon monoxide detectors should
be lit whenever someone is occupying the cabin.
If the breaker has tripped, it indicates that there
is a problem with the carbon monoxide detector,
the breaker, or the wiring from the breaker panel
to the detector. Always determine the cause of
the problem and correct it before resetting the
breaker.
Accessory
Reserved for additional DC equipment.
Port Ignition
Provides protection and power for the computer
memory for the port engine. This “push to reset”
breaker is always supplied current when the bat-
teries are connected.
Stbd Ignition
Provides protection and power for the computer
memory for the starboard engine. This “push to
reset” breaker is always supplied current when
the batteries are connected.
Port Charge - Stbd Charge - Gen Charge
The wires that supply DC charging current to the
batteries are protected by an internal fuse in the
battery charger and three external “push to reset”
breakers, one for each battery output wire. The
external breakers protect the DC charging circuit
from the batteries to the charger. The internal
fuses in the charger protect the DC charging circuit
from the charger to the batteries.
Helm and House Main Breakers
The primary circuits for the house DC panel, helm
switch panel and the windlass are protected and
powered by heavy duty circuit breakers. The
breakers are supplied power whenever the House
battery switch is on. These are heavy duty “push
to reset” breakers that require a firm push to reset
if they trip.
Windlass Main Breaker
The windlass breaker is located on the forward
engine compartment bulkhead, next to the engine
compartment breaker panel and main battery
switches. It this heavy duty circuit breaker is
tripped by an overload, a red lever will be exposed
near the center of the breaker. Reset the breaker
Cabin DC Breaker Panel