MONTGOMERY BOATS 340 SPORT YACHT, Руководство пользователя

Страница: 23 / 191


MONTEREY
BOATS
Propulsion System
Tilt/Trim Gauge
The tilt/trim gauge monitors the position of the
outdrive. The upper range of the gauge indicates
the tilt, which is used for trailering and shallow
water operation. The lower range indicates the
trim position. This is the range used to adjust
the hull angle while operating your boat on plane.
Please refer to Chapter 2 and the engine owner’s
manual for more information on the operation of
the outdrive power tilt and trim.
Trim Tab Indicator Gauges
Monitors the position of the trim tabs. The trim
tabs should always be returned to the full up posi-
tion whenever the boat is moored or before lifting
the boat with a lift.
BI Data Gauge
The depth gauge indicates the depth of the water
below the bottom of the boat, the boat speed, and
water temperature.
Fuel Management (Optional)
Fuel management systems are optional and could
be installed on your boat separately or as part of
the engine monitoring system. The fuel manage-
ment gauge is used to monitor the gallons per
hour and also total gallons used. If you have a
fuel management system installed on your boat,
please refer to the engine or fuel management
manual for information on that system.
Engine Alarm
Inboard engines are equipped with an audible
alarm system mounted in the helm area that moni-
tors selected critical engine systems. The alarm
will sound if one of these systems begins to fail.
Refer to the engine owner’s manual for information
on the alarms installed with your engine.
If an engine alarm sounds, immediately shut off
the engine until the problem is found and cor-
rected.
Volvo Penta EDC Display
The Volvo Penta electronic engine monitoring
system is standard with Volvo diesel engines and
optional on some Volvo gas engines. The system
monitors all of your engine functions on one in-
strument at the touch of a button. Engine speed,
coolant temperature, battery voltage, and boost
pressure (diesel engines) can be monitored in
analog or digital display in 8 different languages.
In addition to monitoring basic engine informa-
tion, you can switch modes to monitor current or
average fuel consumption.
The display can also communicate with the navi-
gation system in the boat to provide boat speed
and miles per gallon from data received from the
GPS or fish finder log. The type of navigation
equipment you have installed in your boat will
determine the functions available.
Refer to the Volvo engine and EDC display owner’s
manuals for more information on the Volvo elec-
tronic engine monitoring system.
4 in 1 Multifunction Gauge