Monterey Boats 378SE, Руководство пользователя

Страница: 70 / 210

70
MONTEREY
BOATS
Electrical System
6.4 Circuit Breaker Panels
Power is distributed to most of the 12 volt acces-
sories through individual circuit breakers located in
the DC breaker panels. There are three separate
DC breaker panels, one on the battery switch
panel in the engine compartment, one in the cabin
DC panel and one at the helm station below the
engine controls.
The following is a description of the circuit breaker
panels and the accessories they control. Some ac-
cessory circuit breakers described in this section
provide protection for optional equipment that may
not be installed on your boat.
Battery Switch Panel Circuit Breakers -
Constant Hot Breakers
The panel beneath the battery switches houses
the constant hot and switched circuit breakers.
These are “push to reset” style circuit breakers
that always active when the HOUSE batteries are
connected. There is no need to do anything with
these circuit breakers unless one of the listed
functions fails to operate indicating that the circuit
breaker may have tripped.
The following is a description of the accessories
controlled by the constant hot breakers in the
battery switch panel.
Cabin Pump
Provides protection and power for the automatic
float switch on the forward bilge pump located in
the bilge below the aft berth. This “push to reset”
breaker is always supplied current when the bat-
teries are connected.
Emerg Pump
Provides protection and power for the automatic
float switch on the emergency bilge pump in the
engine compartment bilge. This “push to reset”
breaker is always supplied current when the bat-
teries are connected.
Memory
Provides protection and continuous power for the
stereo and electronics memory. This “push to
reset” breaker is always supplied current when
the batteries are connected.
Port Charge
Provides protection for the battery charger output
wire that supplies DC charging current to the port
engine battery.
Port IGN
Provides protection and power for the computer
memory for the port engine. This “push to reset”
breaker is always supplied current when the bat-
teries are connected.
Battery Switches & Battery Switch Circuit Breaker Panel