11
6.
Audio Breakout: Digital optical S/PDIF connector for connecting an external
amplifier using a digital optical S/PDIF cable (not included) for amplification of
audio de-embedded from the input. Note that if ARC mode is enabled, this output is
disabled.
7.
IR In: 3.5mm jack for connecting one of the included IR receivers for IR pass-through
control of the video source devices.
8.
IR Out: 3.5mm jack for connecting one of the included IR transmitters for IR pass-
through control of the connected display.
9.
RS232: 3-pin terminal block for connecting the included RS-232 cable for computer
control of the matrix using RS-232 commands or to connect to a third-party device
for RS-232 control.
10.
HDBT In: RJ45 jack for connecting the Ethernet cable from the matrix. The HDCP LED
illuminates green when the video contains HDCP™ content. The
LINK LED
illuminates orange when there is a valid HDBaseT™ link with t
he matrix.
11.
DC 12V: DC barrel connector for connecting an AC power adapter (not included).
Note that the receivers can be power using the Power over Cable (PoC) feature, so
no AC power adapters for the receivers are included.