10
6.
CONTROL:
•
TCP/IP: RJ45 Ethernet jack for connecting to an existing Ethernet network using
a Cat5e/6 Ethernet cable (not included) for computer control using the built-in
Web GUI.
•
RS232: 3-pin terminal block for connecting the included RS-232 cable for
computer control using RS-232 commands or to connect to a third-party device
for RS-232 control.
•
IR EYE: 3.5mm jack for connecting one of the included IR receivers to control the
matrix using the included IR remote control.
•
FW: USB Type-A port for connecting a USB flash drive for performing firmware
updates.
7.
DC 12V: Connector for attaching the included AC power adapter.
Receiver
1.
POWER LED: The LED illuminates red when power is applied.
2.
ARC Mode: Use a paper clip or other sharp, thin device to press the recessed button
to enable or disable Audio Return Channel (ARC) audio. When ARC mode is enabled,
the LED illuminates blue. When ARC audio is selected as the audio source for one of
the digital optical S/PDIF outputs on the matrix, ARC mode is automatically enabled.
3.
ARC Audio In: Digital optical S/PDIF input for connecting the ARC audio source (e.g.,
TV) using a digital optical S/PDIF audio cable (not included).
4.
FW: Micro USB port for connecting a USB flash drive to perform firmware updates.
5.
HDMI Out: HDMI® port for connecting an HDMI display using an HDMI cable (not
included).
