18
CONTROL
Front Panel Buttons
The matrix can be controlled using the buttons on the front panel. Whenever a command is
accepted, the LEDs of all buttons pressed will blink three times, then turn off. If the ENTER
or CLEAR button is not pressed after initiating a change, the LEDs will turn off after eight
seconds.
•
To switch an input to one or more outputs, press one of the INPUTS buttons, then
press one or more OUTPUTS buttons or the ALL button for all outputs, and finally
press the ENTER button to execute the change.
•
To see which input is assigned to a given output, press and hold the OUTPUTS
button you want to query. The LED of the assigned input illuminates blue. The LEDs
turn off when you release the OUTPUTS button.
•
Press and hold the LOCK button for about 3 seconds to lock or unlock the other
front panel buttons. The LED next to the LOCK button illuminates blue when the
front panel buttons are locked.
•
Press and hold one of the PRESET buttons to save the current switching layout to
the corresponding preset. Momentarily press one of the PRESET buttons to load the
corresponding preset. The LED next to the selected PRESET button illuminates blue
to indicate that it is selected.
Note: The matrix supports nine presets, but only the first four presets can be
accessed using the front panel controls and only the first six can be managed in the
Web GUI. The other three presets can be managed using RS-232 control.
•
Press the ENTER button to execute any pending commands.
•
Press the CANCEL button to clear any pending commands.
