6
49-80267 Rev. 4
Installation Preparation
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
■ Tape measure
■ Knife
■ Spirit level
■ Wire cutter/stripper
■ Wire nuts
■ Electric drill with 1/8" and 3/8" bits
■ Phillips and flat blade screwdrivers
■ Hammer
■ Pliers
■ Safety glasses
■ Duct tape
■ Tape to mount template
■ Gloves to protect against sharp
edges
■ 120V 60Hz. 15 or 20 Amp, 2 wire
with ground Properly grounded
branch circuit
■ Strain relief for junction cover
■ 6" round metal duct, length to suit
installation
■ Saw or jig saw
■ Conduit for house wiring
and conduit connector
REMOVE THE PACKAGING
■ Remove the duct cover, parts box and other
packaging.
■ Lift the hood out of the box.
■ Remove and properly discard the plastic wrapping.
■ Remove junction box cover.
756Dia22
756Dia25
756Dia28
756Dia15
Measuring tape
Electric drill with
1/8” and 3/8” Bits
12” long Phillips
head screwdriver
Safety glasses
Gloves
Spirit level
756Dia24
756Dia19
Knife
Wire cutter/stripper
Flat blade screwdriver
Hammer
Pliers
Duct tape
Masking tape
Wire nuts
Strain relief for
junction box
Saw or jig saw
Wire Cutter/Stripper
Conduit
2-piece duct
cover
1” = 2.5 cm; 1’ = 0.3 m