49-80267 Rev. 4
11
Installation Instructions
WALL-MOUNTED INSTALLATION—VENTED TO THE OUTSIDE
4
PREPARE THE HOOD
■ Remove the hood from the box. Remove packaging
and tape.
■ Remove one screw on each side of the cover on
the electrical panel. Lift off the cover and set aside
with screws.
■ Stand the electrical panel upright.
■ Align the screw holes in the bottom of the panel
with the holes on the base of
the hood at the front side.
■ Install 3 screws provided.
5
MOUNT THE HOOD
■ Lift the hood onto the mounting bracket.
■ Check to be sure it is level.
■ Install wood screws through the hood and into the
wall on each side of the mounting bracket.
■ Extend the canopy forward for better access to the
rear mounting screw holes.
■ Install 2 wood screws or fasteners through the
bottom of the hood into the wall.
Remove 2 side
cover screws
Electrical
panel
Secure electrical
panel with 3
screws
Junction box
Inside screw
Install a wood
screw on each
side of the
mounting frame
Mounting
bracket
Install bottom
mounting screws
1” = 2.5 cm; 1’ = 0.3 m