MONARCH INSTRUMENT ACT-1B Series, Инструкция по эксплуатации

Страница: 14 / 16

11
@CH_A/LOEND = 12 (or 1_SEC, HALF) Sets low end time. This allows a
min reading of 5 RPM, 60 RPM, or
120 RPM
@CH_A/GATE Shows Gate Speed (default is 12)
@CH_A/GATE = STD (1/100 Se con d) or FAST (1/1000 second)
Sets Gate Speed (default is 1/100)
@DECPT Shows the number of decimal places displayed
@DECPT = NONE, 1, 2, or 3 Sets the maximum number of decimal
places
@DAC1/ FSCAL Shows Analog Out Full Scale
@DAC1/FSCAL = xxx.xx Sets the Reading value that the Analog output
will output Full Scale (5 V or 20 mA) depends
on TYPE
@DAC1/0SCAL Shows Analog Out Zero Scale
@DAC1/0SCAL = xxx.xx Sets th e Reading value that the Analog output
will output Zero Scale (0 V or 4 mA);
depends on TYPE (default is 0.00)
@OUTPT Shows pulse output polarity
@OUTPT = POS or NEG Sets pulse output polarity
@DISPR
Shows Display Update Rate
@DISPR = HALF or 1_SEC or 1.5_S. This sets the maximum display
update rate to one half a second, 1
second or 1 ½ seconds between
updates
@SERNO Shows unit Serial Number