MONARCH INSTRUMENT ACT-1B Series, Инструкция по эксплуатации

Страница: 7 / 16

4
Figure 3 Sensor Connections
4.0 OUTPUT OPTIONS
The ACT-1B may be equipped with either a Current Output (IO) or an
Analog Output (AO), and/or a TTL Pulse Output (PO).
Note: Full scale RPM settings must have been specified when ordered or
may be user programmed using the optional USB Programming Cable and
PM Remote Software.
The Current or Analog Outputs are connected to the terminals in the
section labeled ANALOG OUTPUT OPTION on the rear panel. The actual
output is marked. The Pulse Output is connected to the terminals under
the section labeled OUT on the rear panel.
CAUTION: The IO or AO COM may NOT be isolated from the other
COM connections.