MONARCH INSTRUMENT ACT-1B Series, Инструкция по эксплуатации

Страница: 9 / 16

6
4.2 Analog Output Option (AO)
The analog output is 0 to 5 V dc.
Connect the Positive side of the signal to the terminal marked OUT ,
and the Return side of the signal to the terminal marked COM .
Note: If your ACT-1B is equipped with either a current output or an
analog output, the full-scale output has been factory preset to the
speed range specified at the time of purchase. The output range may
be programmed using the optional USB Programming Cable and PM
Remote Software.
4.3 Pulse Repeater Output Option (PO)
The Pulse Repeater output provides a conditioned TTL positive going 5
V pulse out for each pulse in.
Connect the Positive signal wire (+5 V pulse) to terminal marked +P
and the Return to the terminal marked COM in the rear panel section
labeled OUT .
Note: The polarity of the optional pulse output can be set by the user
using the optional USB Programming Cable and PM Remote Software.