Monaco DYNASTY 2006, Руководство пользователя

Страница: 86 / 384

86 • SECTION 3 — EXTERIOR & INTERIOR CARE DYNASTY 2006
Waxing
To wax or not to wax? This is a good question. There are many schools of thought on this issue. The two most
common thoughts are:
• The clear coat needs to “breathe.” A layer of wax will seal the clear coat not allowing it to breathe,
possibly leading to failure of the clear coat.
• If the surface is not waxed, what is protecting the surface from the environment (road salts, rain, road tar,
ultraviolet light)?
It is recommended to wax the motorhome twice a year: spring and fall. Many types of protective barriers are
available today that may be applied to the clear coat: glazes, waxes, polishes, rubbing compounds or combinations
of these products.
NOTE:
Use a grease and wax remover before applying another coat of wax. Chemicals can become
trapped between layers of wax, possibly damaging the paint finish.
INFORMATION:
When selecting a product, follow the product manufacturer’s recommended application
instructions.
Types of Products:
Glazes -
Glazes are generally used to fi ll very fi ne scratches in the clear coat. They are applied either
by hand or by using a polisher with a special pad.
Waxes -
Waxes come in many types of chemical make-up. The popular Carnauba wax is a natural wax
from the leaves or fronds of the Carnauba palm tree. Mineral waxes have a paraffi n base. There are
also waxes which contain silicone.
Polishes -
Polishes usually contain a combination of wax based substances with an abrasive, getting the
two for one idea. These products can be too abrasive for clear coats and are not recommended for use.
Rubbing Compounds -
These types of products are generally applied by using a buffer. The use of
rubbing compounds should be left to professionals as undesired results can quickly occur. These types
of products are generally used to correct or fl atten a surface by removing high spots or small amounts
of material.
When selecting a product the container should be marked, “safe for clear coats” or “clear coat safe.” Carefully
follow the application instructions when using a product. Upon fi rst use of a product, try it on a small test spot in
an inconspicuous area in case an undesired reaction occurs.
Observe the test area from different angles to check for hazing or swirl marks. If an abnormal reaction to the
fi nish occurs, discontinue product use and consult the product manufacturer. If the product is a paste, do not allow
dried paste to be baked on by the sun. Remove paste shortly after drying. Clean, dry, 100% cotton cloths are best
suited for the removal of dried paste. Turn the cloth often. Use a separate clean cloth to buff. The surface should
feel slick when rubbing the cloth lightly over it. Avoid repeated wax applications which can cause wax to build
up. Some very fi ne scratches or swirl marks may be removed by an application of a glaze. These types of glazes
fi ll the scratches or swirl marks.
The motorhome has a large surface area. Washing and waxing may not be completed in one afternoon. Select
sections to wax until the motorhome is complete. If the task seems overwhelming, have an automotive detailer
perform the task.